If you’ve been thinking about getting your home’s exterior cleaned but aren’t sure what to budget, you’re not alone. What it costs to pressure wash a house in Arlington, TX varies more than most people expect — and a lot of homeowners end up either overpaying or going with a cheap contractor who causes damage.
Want a quick number for your home? Try our free pressure washing cost calculator to get an instant price range for house, roof, driveway, and gutter cleaning.
This guide breaks down what you can actually expect to pay for pressure washing services in the Arlington area in 2026, what affects the price, and how to make sure you’re getting real value for your money.
Average Pressure Washing Prices in Arlington, TX
Here’s what most Arlington homeowners pay for professional exterior cleaning services:
Driveway Pressure Washing: $150 – $300 A standard single-car concrete driveway typically runs $150 to $200. Larger two-car or extended driveways with heavy staining or oil deposits run $200 to $300. If you add sidewalks or a walkway, expect to add $50 to $100.
House Washing (Soft Wash): $250 – $550 Soft wash exterior cleaning for a typical Arlington home ranges from $250 for a smaller single-story home to $550 for a larger two-story. The final price depends on your home’s square footage, siding material, and how much mold, algae, or buildup needs to be removed.
Roof Soft Washing: $300 – $600 Roof cleaning in Arlington typically costs between $300 and $600 ($0.30 to $0.35 per sq ft) depending on the size and pitch of your roof, and how much algae coverage there is. Low-pitched roofs that are easy to access cost less; steeper multi-section roofs with heavy black streaking cost more.
Gutter Cleaning: $125 – $275 Most single-story homes in Arlington fall in the $125 to $175 range. Two-story homes or homes with longer gutter runs typically fall between $175 and $275. Price includes manual debris removal, downspout flushing, and bag-out.
Full Exterior Package (House + Driveway + Gutters): $500 – $900 If you want everything done in a single visit — house washing, driveway cleaning, and gutter cleaning — most Arlington homes fall in the $500 to $900 range. Bundling services together almost always saves you money compared to booking them separately.
Power Washing Prices at a Glance
| Service | Typical price in Arlington, TX |
|---|---|
| Driveway pressure washing | $150 – $300 |
| House washing (soft wash) | $250 – $550 |
| Roof soft washing | $300 – $600 |
| Gutter cleaning | $125 – $275 |
| Full exterior package (house + driveway + gutters) | $500 – $900 |
Cost to Pressure Wash a House in Arlington
For most Arlington homes, the cost to pressure wash a house (done safely with a soft wash) falls between $250 and $550 ($0.25 to $0.30 per sq ft). A small single-story home sits at the low end, while a large two-story home with heavy mold or algae sits at the high end. Adding a driveway or gutter cleaning in the same visit usually lowers the total compared with booking each service separately. See our before and after gallery for real results.
What Factors Affect the Price?
Not every home is the same, and several factors will move your final quote up or down.
Size of the area. This is the most straightforward factor. A 3,000 sq ft home costs more to wash than a 1,500 sq ft home. A triple-wide driveway costs more than a single-car pad.
Level of buildup and staining. A home that hasn’t been cleaned in five years with heavy mold and algae growth takes more time, more product, and more effort than one that gets cleaned annually. Expect to pay more for severe buildup.
Number of stories. Two-story homes require more equipment, more time, and carry more risk for the technician. Single-story jobs are generally priced lower.
Surface type. Concrete driveways and standard vinyl siding are the most straightforward to clean. Brick, stucco, natural stone, and stamped concrete require more care and sometimes different equipment or chemistry — which affects pricing.
Oil stains or specialty staining. If your driveway has significant oil staining, a degreaser pre-treatment is needed before the pressure wash. This adds time and product cost, but it’s the only way to actually lift the stain.
Access. If equipment can’t be easily moved around your property, or if we need to work around landscaping, vehicles, or structures, that can affect the time required.
How Much to Pressure Wash a 2,000 Sq Ft House?
A 2,000 square foot home falls within our typical house washing range of $250 to $550 ($0.25 to $0.30 per sq ft). Where it lands in that range depends on whether it is one or two stories, the siding type, how much mildew or algae is on the walls, and how easy it is to reach every side of the house. A single-story 2,000 sq ft home with light dirt will usually be closer to the lower end, while a two-story home with heavy growth will be closer to the upper end. For an exact number, request a free quote.
Is Professional Pressure Washing Worth the Cost?
Almost always, yes. Here’s the math most Arlington homeowners don’t think about.
A professional house washing costs $250 to $550 ($0.25 to $0.30 per sq ft). A full exterior repaint — which becomes necessary when mold and algae are left to degrade your paint and siding — costs $3,000 to $8,000. Roof replacement, which happens years earlier when algae destroys shingle granules, costs $8,000 to $20,000.
Regular exterior cleaning extends the life of your siding, roof, and concrete surfaces significantly. Most professionals recommend treating it the same way you treat an oil change — a modest regular cost that prevents catastrophic future expenses.
Beyond the maintenance angle, there’s real estate value to consider. A clean exterior consistently raises the perceived value of a home. If you’re selling, pressure washing is one of the highest-ROI improvements you can make for the money spent.
Why the Cheapest Quote Isn’t Always the Best Deal
In the Arlington area, you’ll find quotes ranging from $79 specials advertised on Facebook to professional contractors charging $400 or more for the same job. The difference usually comes down to a few things.
Equipment. Budget operators often use consumer-grade pressure washers that don’t have the volume or the soft wash capability to clean properly. They blast high pressure at everything, which cleans the surface temporarily but damages siding, strips shingle granules, and forces water behind walls.
Insurance. A licensed, insured contractor is protecting you and your property. If something is damaged during cleaning — a window seal, a piece of trim, a vehicle in the driveway — an uninsured contractor leaves you holding the bill. Always ask for proof of insurance before anyone touches your home.
Cleaning chemistry. Professional soft washing requires real commercial-grade biocide solutions that kill mold, algae, and bacteria at the root. Budget operators often use soap or diluted bleach that looks clean for a few months, then the growth comes right back.
Satisfaction guarantee. A reputable local contractor stands behind their work. If you’re not happy, they come back and fix it.
How to Get an Accurate Quote in Arlington, TX
The best way to get an accurate price is to request a free on-site or photo-based quote. At Stegmeier Pressure Washing, we provide free, no-obligation quotes for every job in Arlington and the surrounding DFW area. There are no hidden fees, and your price is confirmed before we start — not after.
When comparing quotes, it also helps to review How to Avoid Home Improvement Scams from the Texas Attorney General.
Ready to find out exactly what your home’s exterior cleaning will cost?
Call or text (817) 773-8984, email James@staginglab.us, or request your free quote online →. We serve Arlington, Mansfield, Grand Prairie, Burleson, and surrounding Tarrant County communities.
Related guides: How much it costs to pressure wash a driveway and how to pressure wash a house safely.
Related: Pressure washing prices for every service in DFW
Pressure Washing Cost FAQs
How much does it cost to pressure wash a house?
In Arlington and the DFW area, most professional house washes cost $250 to $550 ($0.25 to $0.30 per sq ft). Home size, number of stories, siding type, and how much mold or algae buildup there is all affect the final price.
How much does it cost to pressure wash a 2,000 sq ft house?
A typical 2,000 sq ft home falls within the $250 to $550 ($0.25 to $0.30 per sq ft) house washing range. One-story homes with light buildup land toward the lower end, while two-story homes or heavy staining land toward the upper end.
How much does it cost to pressure wash a driveway?
Most residential driveways in DFW cost $150 to $300 ($0.18 to $0.25 per sq ft) to pressure wash, depending on size and staining.
Is it cheaper to bundle pressure washing services?
Yes. Booking your house, driveway, and other surfaces together usually costs less than separate visits. A full exterior package typically runs $500 to $900.
